产品说明：
兼容FUTABA双叶S-FHSS/FHSS制式的八通道接收机，T6J/T8J/T10J/T14SG/T18SZ/18MZ等遥控器适用。用于TAROT：120/130/140/150/180级别穿越机时，可单线直插飞控的S-BUB插座，极大简化了布线的复杂度。单颗仅重4.5克，非常适合小型赛级接收机使用。
产品参数：
输出通道数：8通道
接收机模式：S-FHSS/FHSS制式
输入电压：5V-8V
工作温度：-10-80℃
尺寸规格：36×19×7MM
重量：4.5克
产品设置步骤：
1：遥控器信号设置为S-FHSS/FHSS制式。
2：连接接收机电源，LED显示红灯。
3：打开遥控器发射机电源，接收机显示绿灯闪烁。
4：按住开关3秒，LED显示为绿灯常亮，即为设置成功。
警告事项：如果附近有同类的S-FHSS系统信号时，尽量避免进行对频设置，以免连接到对方接收机。强烈建议检查、确认、接收机在您的发射机控制中。
Product introduction：
Compatible with the FUTABA S-FHSS/FHSS 8CH receiver， as 6J 8J 10J T14SG T18SZ/18MZ etc．Applicable TAROT :120/130/140/150/180 racing drone ，can put into S-BUS directly ，Simplify the complexity of the wiring，the weight of single is 4.5g ， suitable for Mini racing drone.
Product Specification：
Output Channel：8CH
Receiving mode：S-FHSS/FHSS
Input Voltage：5V-8V
Working Temperature range：-10-80℃
Dimension：36X19X7 mm
Weight：4.5g
Product SETUP ：
1：Transmitter signals is S-FHSS/FHSS mode .
2:Turn on the receiver ，the LED on the receiver should be red light.
3:Turn on the transmitter ，the LED on the receiver will be green light and flash.
4:Press and hold the link switch about 3 seconds ，the LED on the receiver will change to solid green ，it indicates the binding is completed and successful．
WARNING :
If there are many S-FHSS systems turned on in close proximity ，In that case ，Pls don’t to linking ， In order to avoid link to one of other transmitters，we strongly recommend you to doublecheck whether your receiver is really under control by your transmitter．
