产品说明:
兼容FUTABA双叶S-FHSS/FHSS制式的八通道接收机,T6J/T8J/T10J/T14SG/T18SZ/18MZ等遥控器适用。用于TAROT:120/130/140/150/180级别穿越机时,可单线直插飞控的S-BUB插座,极大简化了布线的复杂度。单颗仅重4.5克,非常适合小型赛级接收机使用。
产品参数:
输出通道数:8通道
接收机模式:S-FHSS/FHSS制式
输入电压:5V-8V
工作温度:-10-80℃
尺寸规格:36×19×7MM
重量:4.5克
产品设置步骤:
1:遥控器信号设置为S-FHSS/FHSS制式。
2:连接接收机电源,LED显示红灯。
3:打开遥控器发射机电源,接收机显示绿灯闪烁。
4:按住开关3秒,LED显示为绿灯常亮,即为设置成功。
警告事项:如果附近有同类的S-FHSS系统信号时,尽量避免进行对频设置,以免连接到对方接收机。强烈建议检查、确认、接收机在您的发射机控制中。
Product introduction:
Compatible with the FUTABA S-FHSS/FHSS 8CH receiver, as 6J 8J 10J T14SG T18SZ/18MZ etc.Applicable TAROT :120/130/140/150/180 racing drone ,can put into S-BUS directly ,Simplify the complexity of the wiring,the weight of single is 4.5g , suitable for Mini racing drone.
Product Specification:
Output Channel:8CH
Receiving mode:S-FHSS/FHSS
Input Voltage:5V-8V
Working Temperature range:-10-80℃
Dimension:36X19X7 mm
Weight:4.5g
Product SETUP :
1:Transmitter signals is S-FHSS/FHSS mode .
2:Turn on the receiver ,the LED on the receiver should be red light.
3:Turn on the transmitter ,the LED on the receiver will be green light and flash.
4:Press and hold the link switch about 3 seconds ,the LED on the receiver will change to solid green ,it indicates the binding is completed and successful.
WARNING :
If there are many S-FHSS systems turned on in close proximity ,In that case ,Pls don’t to linking , In order to avoid link to one of other transmitters,we strongly recommend you to doublecheck whether your receiver is really under control by your transmitter.