M2.5 Locking Nut x 2
Stainless steel outer wire horizontal axis x 3 (Φ3x48.4mm)
Solve the original horizontal axis fried machine off, higher strength, accuracy guaranteed. Features are as follows:
1 stainless material, high strength, no rust, to facilitate long-term use and storage.
Self-locking nut is fixed, do not need plastic screws, very easy to use.
Dimensions control in less than 0.01mm. Absolutely will not pretend not go.
4 with two self-locking nuts.
A small gap, and easy disassembly nut.
6. Locking accurate size, the other deputy factory outside the wire horizontal axis top paddle root of the problem does not occur.
7 dedicated 5mm socket wrench and more durable than 1.5mm hex.
8, will not break, so the the missing horizontal axis washer problem will be gone forever.
9 reduces the number of parts, and nuts is relatively large is not easily lost.
Note: To use the special socket wrench before you can use this horizontal axis. Course, you can also use 5mm sleeve converted mill head small enough to be stuffed into the paddle folder structure.
A set of three with two self-locking nuts.
Note: the nuts do not lock too tight, too tight will cause thread damage.
Applicable 450v2 se
