Product instruction ： Frsky S.BUS receiver ,Simplify the complexity of the wiring ,small and exquisite ,the weight of single is 3.3g.Compatible with Frsky X9D(Plus) RC(D8 mode ) ,XJT (D8 mode ) etc. Used for Mini racing drone . Bind SETUP ：
1. Click Frsky X9D(Plus), Transmitter enter [MODEL SETUP];
2. Then click [Mode] , Select[D8]mode ,option [Channel Range] , after select [CH1-8];
3.Click BIND in Receiver option press the ENTER button,you can hear the drops of transmitter RC,this suggests that RC is transmitting the signal of BIND status, at this time press and hold the button on the receiver and power on, LED stays on for about 3 seconds and then turns off,this indicates completion of BIND, RC exits the BIND mode, drops is disappear ，release the button, the receiver can work after re-powering.
Led indicator ： 
 WARNING: Press and hold the button firstly when bind and then power on,finally completed bind after re-power
Product parameters ： Output Channel ：8Channel Output signal ：S.BUS Input voltage ：5V-7V Working temperature ：--10~80℃
Size ：24×16×5MM
Weight ：3.3g Specification ： S.BUS receiver *1 S.BUS connections line *1 S.BUS controller line for 120-150 racing drone connect
|
