    
Product Description:
·Tarot factory electronic drone thrower;
·CNC machined from 6063 aircraft aluminium and 304 stainless steel;
·Construction using the design principle of mechanical levers;
·Reduces the output power required by the drive mechanism;
·The compact size of the throwing device and the articulated structure of the lever will not jam due to the weight of the load (***KG load in the extreme test and smooth retrieval);
·You can mount multiple electronic throwers from this range depending on the environment in which they are used;
·And the sequence of throwing devices can be controlled independently.
Product Parameters:
Voltage:DC12-60V
Size:108mm*70mm*25mm
Weight:308g
Product operating instructions and LED status light description:
Note:This product uses standard PWM remote control servo signal analysis(the following description assumes a 0-100% travel amount as a result of the analysis)
1:When the PWM signal input value remains at 0-59% travel,the red LED is always on/no device action.
2:When the PWM signal input value reaches 60-100% travel, trigger the device drop switch, LED green light single flash once, after the end of the drop LED light to keep the green light always on (1 trigger to perform 2 consecutive drop operation).
3:LED red light flashes(2 times/second)when no PWM signal input is detected by the device.
4:When power-on initialisation,the LED flashes green(2 times/sec)if the detected PWM signal input value is at 60-100% travel,until the PWM signal input value is adjusted to 0-59% travel when the operation of Article 1 is triggered.
Note: Hot plugging and unplugging of the product is strictly prohibited (the device must be connected first and then energized).
Packing List:
120KG Electronic Thrower ×1
2.0-3P To Dupont head connection cable ×1
Cup head screw(M5*18mm) ×6
|
