1.INTRODUCTION
1.1 Compatibility:FASST 2.4GHz Air Systems(7CH Mode/Multi Mode):6EX，7C，TM-7，TM-8 T8FG，T10C，TM-10，T10CG，T12Z，T12FG，TM-14，T14MZ etc.
1.2 Specifications:
Working temperature range:-10~+80℃
Operating voltage range:3.5~8.4V
Output channel:16CH
Dimension:29x19x7.5mm
Weight:4.2g
Receiving mode:FASST
Output signal:RSSL & S.BUS(1CH~16CH)
Servo frame rate:14ms(FS-normal speed mode)
7ms(HS-high speed mode)
1.3 Features:
1)Compatible with FASST 2.4GHz Air Systems(7CH Mode/Multi Mode);
2)With RSSL output;
3)Adopt american-made IC,improve sensitivity and stability;
4)Compatible with Futaba S.BUS servos;
5)Ideal for the FPV racing drones competition.
2.SETUP
2.1 Bind procedure:
Turn on the transmitter,connect the battery to the receiver while pressing receiver is F/S button.After the red LED is off and green LED is solid the binding process is completed and the receiver is operating normally.
2.2 LED status:
3.HOW TO SWITCH BETWEEN HS Mode with FS Mode
HS:High Speed
FS:Fast Speed
Turn the transmitter off,connect the battery to the receiver,press the F/S button of receiver for 6 seconds and then release.the red LED will flash fast in HS Mode and slow in FS Mode.Repeat this to alternate modes.
WARNING:HS mode is only applied for high-speed digital servos.Other servos should select FS mode otherwise servos will get hot or even burn out.
Product Specification ：
FASST Mode SBUS receiver *1
Single SBUS plug connection cable *1
Manual *1
