Product Descriptions:
· Applicable to TAROT500 DFC rotor head
· 6061-T6 Aluminum alloy CNC processed for multi-copter
· Tilt rod structure design, the unique hinge design can partially balance rolling moment
· New main rotor holder extension arm bi-directional bearing design
· Split main rotor holder efficiently decreases the cost
· Ultra-low C.G. and short main shaft design, the rotor level closed to C.G. of whole vehicle
· New DFC main rotor housing applies 3 “V” type main shaft tightening design
· There are laser scale line on New DFC main rotor housing and on the top of main holder
· 85 degree hard rubber applied for DFC damper, larger size bearing moves trust bearing inside
· Framework structure improve the support structure
· Please note when you install thrust bearing, the large diameter one shall be installed closed to the hub (“IN” mark faces inside) to transmit the pulling force smoothly. And the side with ball bearing faces inside to avoid lubricants spilled out.
Specifications:
· 500 DFC main rotor housing set x 1
· 500 feathering shaft sleeve x1
· 500 DFC head damper x 2(Φ6xΦ11x4mm)
· Cup head hexagon screw x 1(M2.5 x14mm)
· Cup head hexagon screw x 2(M2.5 x8mm)
· M2.5 lock nut x 1
· 500DFC metal main rotor holder x2
· 500DFC feathering shaft x1¡]M3x6x74MM¡^
· Bearing MR126ZZ x 4(Φ6xΦ12x4mm)
· Positioning washer x2¡]6x9.7x0.5MM¡^
· Thrust bearing x 2(Φ6.0xΦ12x4.5mm)
· Washer x2¡]3.1x9.9x1.0MM¡^
· M3x8MM cup head hexagon collar screwx2
· M3x19MM cup head hexagon screwx2
· M3 lock nut x2
· Flange bearing x 4(Φ2.5xΦ6x2.5mm)
· 12.9 class M2.5*6MM cup head hexagon screw x2
· 12.9 class M2.5*11.7MM cup head hexagon screw x2
· 500DFC main rotor holder extension arm x2
· Φ2.5xΦ4.0x6.0mm tube spacer x2
· M2.5 set screw x 2(M2.5x12mm)
· 500 DFC main rotor ball link x2
· 500DFC tilt rod x2
· M2x19 cup head hexagon collar screw x2
