Product Description:·This servo tester makes it easy to detect and set servo dummy, dither and neutral positions
·Two sets of servos or ESCs can be connected
·Single-chip control, good stability and high precision
·Turn the knob can test the servo
·If an electronic speed controller (either brush or brushless) is connected, the speed can be adjusted manually without the remote control device
·Very useful for testing the performance of a governor or motor without the hassle of connecting a remote control to a receiver
·It functions as a "manual receiver", with a knob that simulates the rudder of a transmitter.
Product Parameters:Output: ≤15mA (5.0)
Input: DC 4.2-6.0v
Output signal: 1.5ms±0.5ms
Size: 46*32*17mm
Weight: 8g
Adjustment mode: manual, automatic, neutral.
Instructions for use:Refer to the product wiring drawing, the left side is connected to the servo, divided into 3 groups, can be connected to 3 servos. The right single row of pins connects to the power supply, [+] connects to the positive side of the power supply, [-] the battery connects to the negative side of the power supply, the three Led lights will be on at the same time after the power supply is switched on.
1:Then only the [Man] light comes on for [manual mode],adjust the potentiometer to test
2:Press the [Select] button,the middle [Neutral] light is on for [Neutral mode] test
3:Press the [Select] button,the third [Auto] light comes on for [Auto Mode] test
Product Specifications:Servo Tester×1
