Product Description:
·This servo tester makes it easy to detect and set servo dummy, dither and neutral positions
·Can be synchronized output control 4 servos and used to compare the performance steering gear
·Control of the steering servo output signal can be accurate to 2us (1 milliseconds = 1000 microseconds)
·Can test the steering gear is able to respond to subtle changes
·With PPM signal test function in the display the input PPM
·Signal changes while the input the PPM signal synchronization output to the servo.
Product Parameters:
Input:DC 4.8-6.0v
Output signal width:800-2200us
Size:75*34*25mm
Weight:26.5g
Operation mode mode:Manual, Automatic, Neutral
Pulse width setting:50HZ, 125HZ, 250HZ
Instructions for use:
Refer to the product wiring drawings,the left side of the terminal supply part 4.8-6V voltage input,the right side of the 4-way signal output(the upper middle and lower are "signal S", "positive +", "negative -"),can be connected to 4 servers.
[Select] button:
1:Energized automatically into [S-1] manual mode (Manual) and in 20 microseconds/50HZ analog servo signal cycle, rotating the potential to increase or decrease the signal width.
2:Press the [Select] button once to enter the [S-2] mode for the [Neutral] test.
3:Continue pressing the [Select] button once to enter the [S-3] mode for [Automatic] testing.
4:Continue to press the [Select] button to switch back to [S-1] Manual mode and cycle through them in turn.
[Pulse Width] button:
1:Power on to automatically be in the 20us/50HZ analogue servo signal cycle.
2:Press the [Pulse Width] button once to enter a digital servo signal cycle of 8us/50HZ.
3:Continue to press the [Pulse Width] button once to enter a digital servo signal cycle of 4us/250HZ.
4:Continue to press the [Pulse Width] button once for 20us/50HZ and so on.
Product Specifications:
Servo Tester×1
