Product Descriptions :
· 6061-T6 aluminum with CNC processed
· Suitable for TAROT/ T-REX 450 series models
· New split main grips TL48013 use slip nut limit hole, locking without using a wrench, easy-to-use.
· The split extended arm (TL48014) speical design to provide crush zone for main grip. It will be broken easier than main grip from serious impact, thus save your main grip.
· The new design of main grip will seat the thrust bearing insind, reducing the virtual potential swing.
· Large size bearings can withstand more tension, in order to adapt to the current models of large power requirements.
· The new M2.5 linkage bal use stepped threaded design is bring better contact surface and avoid thread stress point.
· New split main rotor holder TL48013 applies to all rotor hub width 27MM to upgrade, the package comes with TL48009.
· New spindle using 480 size design.
· Effective thread depth of the spindle bore 8MM, in order to avoid the impact.
· Main Rotor Housing New spindle lock design, effective to hold fast to the spindle to prevent the holder swing.
· Flybarless spindle holder to use ultra-low CGdesign enables the main rotor disk close to the CG.
· This product can be used length 32.8MM 450FL rod TL2639 (optional) .
Product Specifications :
· 450 PRO New One piece FL Main Rotor Housing Set TL45117 x 1
· Integrated spindle demper x 2
· Cup head screw (M2x9.5mm) x1
· Cup head screw (M2x6.0mm) x3
· Cup head screw (M2x8.0mm) x2
· Enhanced hex nut (M2) x 1
· Rotor head stopper x1
· Radius rod x 2
· Bearings (1.5x4x2mm) x 4
· Frange bearings (2x5x6x2.3mm) x 4
· 450FL metal control arm x 2 (TL45113)
· Socket button head screw (0 # x 4mm) x 4
· Metal rotor holder x 2 (TL48013)
· Bearing(Φ4.0xΦ9x3.0mm) x 2
· Thrust bearing x. 2 (Φ4.0xΦ9x4.0mm)
· Washers x 2 (Φ4xΦ6.5x0.5mm)
· Bearing x of 2 (Φ4.0xΦ9x4.0mm)
· Washers x 2 (Φ2.5xΦ4.5x0.3mm)
· 12.9 M2.5 * 15MM cup of head SHCS x 2
· Cup head screws x 2 (M3 x 15MM)
· M3 slip nut x 2
· The 450 DFC new shanle shaft TL48009 (Φ4.0x54.0mm) x 1
· 450DFC main rotor holder arm TL48014 x 2
· 12.9 M2 * 5MM Cup head x 2
· 12.9 M2 * 9MM Cup head x 2
