产品类别
  1. 多旋翼无人机及配件
  2. 直升机整机及配件
  3. 云台产品及配件
  4. 航模电子产品
  5. 装机辅助工具
  6. 斯特林发动机
产品展示
飞越/Tarot FPV图像传输系统/5.8G/600MW图传套装 TL300N
产品展示

产品名称:飞越/Tarot FPV图像传输系统/5.8G/600MW图传套装 TL300N

所属类别:图传/摄像头/天线

销售价格:355 RMB  

上传时间:2016-09-29

浏览次数:13830

产品说明:
     TAROT自主开发的32频点! 600mw 5.8g图传系统具有超迷你的外形体积和超轻的重量,特别适合目前小型多轴旋翼飞行器以及穿越机使用。32频点兼容常规频率,提供1路视频信号,2路音频信号远距离传输,另外提供5V1A电源输出(可用于图像叠加、摄像头等供电。请先确认相关设备电压电流以免烧毁)其发射端重量仅8.3g(不含天线)

产品规格:
TX5832-600M音视频发射器×1
RX5832音视频接收器×1
7P彩色排插线×1
3.5MM电源线×1
2.5MM音视频线×1
说明书×1

发射器详细参数:Specifications:
1、净重8.3G(不含天线)Weight: 8.3G (without antenna)
2、体积21*33*7.5MM Dimension: 21 x 33 x 7.5 mm
3、发射频率:5645-5945MHZ /Working Frequency: 5645-5945MHz
4、通道数:4波段,共32通道Channel: 4 bands / 32 channel
5、通道选择:5位迷你拨码开关5-DIP switch
6、发射功率:27.5 dbm (600mw) Output Power: 27.5 dbm (600mw)
7、输入电压:7-26V DC (2-6S)Input Voltage: DC 7-26V (2-6S)
8、输出电压:5V 1A /Output Voltage: 5V 1A
9、天线接口:RP-SMA<外螺纹+针> 50Ω/Antenna Adaptor: RP-SMA 50Ω
10、工作环境温度:-10至60摄氏度。Working Temperature: -10 ~ 60 degrees.
11、调制类型:FM Frequency: FM

接收器详细参数:Specifications:
1、净重10.9G(不含天线)Weight: 10.9 G (without antenna)
2、体积28*46*10MM /Dimension: 28 x 46 x 40 mm
3、接收频率:5645-5945MHZ /Working frequency: 5645-5945 MHZ
4、通道数:4波段,共32通道Channel: 4 bands / 32 channels
5、通道选择:5位迷你拨码开关5-DIP switch
6、接收灵敏度:-85 dbm/ Receiving Sensitivity: -85 dbm
7、输入电压:7-26V DC (2-6S)/Input Voltage: DC 7-26V (2-6S)
8、天线接口:SMA 50Ω/Antenna Adaptor: SMA 50Ω
9、工作环境温度:-10至60摄氏度。Working Temperature: -10 ~ 60 degrees
10、调制类型:FM/PLL Frequency: FM/PLL
11、音视频输出接口:2.5mm  4节音视频插头AV output: 2.5mm 4 pins AV output
12、电源接口:外3.5mm内1.3mm 直流电源插头Power input: 3.5mm (exterior) 1.3 mm (interior) DC
注意事项:
1、请先安装天线,再接通电源。以免造成设备故障
2、选择合适的工作频率,并将接收设置到相同的频率。详见频率表
3、本发射机功率较大,工作时请勿用手接触外壳以免烫伤。外壳发烫属正常现象,请放心使用。
4、输入电压为7-26V(2-6S),请勿超出电压范围使用。
5、输出电流电压为5V 1A,请注意摄像头是否在电压电流范围内。
Note:
1、Install the antenna before connecting the power to avoid further damage.
2、Choose proper working frequency and tune the receiver to the same frequency. Please refer to the channel list.
3、Do not touch the surface of transmitter while operating. It is normal the surface is getting hot.
4、The input voltage range is between 7-26V (2-6S), do not overload the working voltage.
5、The output voltage is 5V1A. Please confirm the current and voltage of the camera


相关产品